讯海轴承/SKF/圆柱滚子轴承/NCF 2926 CV

SKF NCF 2926 CV 圆柱滚子轴承 130×180×30 mm斯凯孚 · 瑞典

圆柱滚子轴承 · 主要尺寸 130×180×30 mm

SKF NCF 2926 CV 圆柱滚子轴承

关键尺寸

130内径 d / mm
180外径 D / mm
30宽度 B / mm

资料下载

SKF NCF 2926 CV 技术参数

尺寸
SKF NCF 2926 CV 尺寸示意图
孔径130 mm
外径180 mm
宽度30 mm
孔径130 mm
外径180 mm
宽度30 mm
内圈挡边直径147 mm
外圈挡边直径161 mm
外圈滚道直径167.1 mm
正常位置轴承套圈相对于其他套圈允许轴向位移2 mm
倒角尺寸1.5 mm
倒角尺寸1.1 mm
性能
基本额定动荷205 kN
基本额定静负荷360 kN
参考转速1600 r/min
极限转速2000 r/min
属性
轴承部件整套轴承
轴向位移能力一个方向上
列数1
定位特征,轴承外圈不带
孔类型圆柱孔
保持架不带
设计不可分离
法兰数量,外圈1
挡边数量,内圈2
活套法兰无
径向游隙CN
公差等级正常
涂层不带
密封不带
润滑剂无
补充润滑功能不带
新产品的指示性碳足迹8.4 kg CO<sub>2</sub>e
挡肩尺寸
SKF NCF 2926 CV 挡肩尺寸示意图
轴挡肩直径138 mm
轴挡肩直径144 mm
轴承座挡肩尺寸172 mm
轴承座挡肩尺寸173 mm
倒角半径1.5 mm
倒角半径1 mm
数据计算
基本额定动荷205 kN
基本额定静负荷360 kN
疲劳载荷限值40.5 kN
参考转速1600 r/min
极限转速2000 r/min
计算系数0.2
极限值0.3
计算系数0.4

产品说明

Single row full complement cylindrical roller bearings are designed to accommodate very high radial loads in combination with moderate speeds. The bearings incorporate a maximum number of rollers as they are not equipped with a cage. Having two integral flanges on the inner ring and one flange on the outer ring, NCF design bearings can accommodate axial displacement in one direction. A retaining ring on the outer ring holds the bearing together. The retaining ring should not be loaded axially during operation. Also available on request with special sized bore and/or outside diameters, suitable for reworked shafts and housings.

尺寸图纸

SKF NCF 2926 CV 尺寸图纸

点击图纸可放大查看,再次点击关闭。

同尺寸其他型号

以下型号与 SKF NCF 2926 CV 的主要尺寸相同(d 130 × D 180 × B 30 mm),可用于同尺寸替代选型。

同系列相近型号